YATO Digital Clamp Meter YT-73091

The universal meter YT-73091 is equipped with measuring clamps which allow to measure the intensity of alternating current in a single wire with the induction method. This allows you to measure much higher currents than in the case of conventional electric meters from the YT-7308X series (up to 600A). The maximum diameter of the cable tested by the YT-73091 multimeter is 37mm. In addition to measuring the value of alternating current, this device can measure direct voltage, alternating voltage, resistance, temperature and check the operation of the diodes. The buzzer is useful when inspecting electrical installations - it allows us to easily verify the continuity of the circuit. Automatic multimeter shutdown feature saves battery life. An additional cover protects the multimeter from falls and impacts during transport. In addition, the YT-73086 digital meter allows you to measure the temperature, which is particularly useful when detecting faulty components in electrical installations (increased resistance of e.g. a damaged cable causes the component to heat up). The "DATA H" button is used to save the measured value on the display. The "MAX H" button is used to store the highest measured value on the display. Both of these buttons are very useful for highly variable measurements. The backlit screen of the meter enables operation in low light conditions.